Attack-time delay
In telecommunications, attack-time delay is the time needed for a receiver or transmitter to respond to an incoming signal.
For a receiver, the attack-time delay is defined as the time interval from the instant a step radio-frequency signal, at a level equal to the receiver's threshold of sensitivity, is applied to the receiver input, to the instant when the receiver's output amplitude reaches 90% of its steady-state value.[1] If a squelch circuit is operating, the receiver attack-time delay includes the time for the receiver to break squelch.
For a transmitter, the attack-time delay is defined as the interval from the instant the transmitter is keyed-on to the instant the transmitted radio-frequency signal amplitude has increased to a specified level, usually 90% of its key-on steady-state value.[1] The transmitter attack-time delay excludes the time required for automatic antenna tuning.
See also
[edit]References
[edit]
This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 22 January 2022. (in support of MIL-STD-188).